Razor E90 Electric Scooter: The newest member of Razor’s electric family, the Razor E90 Electric Scooter. The E90 is an all new cool zippy electric scooter that features a push button throttle, a single battery and foot brake for the perfect transition scooter from kick to electric Because if it’s lightweight heavy duty all steel frame and single 12V sealed lead acid battery, the E90 can go longer and is easier to transport without giving up the power of the classic E100 Electric Scooter. Uses a simple kick start motor and can travel up to 50 minutes of continuous use at speeds up to 9 mph. Features a spring loaded kickstand, rubber hand grips, and newly enhanced foot brake, similar to the design used on the kick scooters. Also, features a high torque chain driven motor, powered by a rechargeable 12V sealed lead acid battery system. Includes a UL battery charger, tool, and is backed by a 90-day warranty. Some assembly required. Recommended for ages 8 and older and will support a rider up to 120 pounds.
Author: John
-
AC to 6VDC 1.5-Amp Power Supply
E-flite AC to 6VDC supply for Celectra 4-Port and Celectra 1-Cell Variable Rate Li-Po Chargers
-
Razor PowerWing DLX
Cruise through town with confidence with the Razor Deluxe PowerWing Drifting Scooter, a sleek and stylish trick scooter that powers itself. The DLX PowerWing sports a pair of rear caster wheels on a double-wing platform, along with a 125 mm front wheel with a patent-pending brake system. The rear caster wheels are what make the PowerWing tick, propelling the scooter with a simple twist of the feet. Thanks to the unique design, it’s easy to steer the PowerWing around tight corners or perform kick-outs, side drifts, spin-outs, and other tricks.
-
Mini Micro Scooter – Green
The mini Micro scooter is the quality kick scooter for young children. Its unique ‘lean-and-steer’ design allows children to direct the scooter by using their body weight to curve from side to side. This design puts the rider in control as they enjoy the feeling of ‘surfing the sidewalks’! The mini kickboard is constructed with 3 wheels for greater stability and control, allowing children to ride with confidence. The polyurethane wheels also create a wonderfully smooth glide – and a quiet ride (a joy for both parents and children!) The rear ‘spoon’ brake provides additional control for the rider. The mini kickboard is low-to-the-ground and large enough for two feet, making it easy for riders to hop on and off or to switch from pushing to simply enjoying the ride. Its light weight makes it easy for parents or kids to pick up and carry when necessary. The aqua mini kick scooter makes scooting fun for young children as well as helping to develop their balance, coordination and motor skills.
-
Royal Guard P-Core Pro Scooter
If you’re looking for a pro scooter that is certifiably “park ready” this is it. Bullet proof 6061-T6 deck, neck, and bar construction will take park abuse hour after hour, day after day, year after year, while it’s lightweight P-Core wheels and ABEC 5 bearings keep you rolling fast and flying high. Royal’s P-Core scooter is everything you need and nothing you don’t which means you’ll still have some money in your pocket to customize components later down the track. Royal Quality. Rock Solid.
-
Razor Jr. Kixi Mixi Scooter
From Three to Two In A FlashThey grow up fast, and the Mixi convertible kick scooter is ready to grow with them. The two-in-one Mixi gives kids the extra stability of three wheels while they need it, then lets parents switch it up to a standard two-wheel scooter as their child’s confidence and abilities develop.
Ready To GrowStudies suggest that children at age 3 have the coordination required to use a 3-wheeled scooter, but may not have developed the balance required to operate 2-wheeled scooters. The Kixi Mixi is the perfect ride for youngsters who are almost ready to make this transition. The Mixi’s unique rear wheel assembly makes the process of converting from three wheels to two a snap and, in a matter of minutes, allows your child’s favorite ride to grow up alongside them.
How To: Convert The Kixi MixiIn this short guide, we’ll show you how to quickly switch the Kixi Mixi from three wheels to two. First up, grab the tools that came with your Kixi product. You’ll need both to make the switch: 5mm Allen Wrench and Wrech (both shown with image from manual) Once you’ve got your tools ready, making the switch is a snap.
3 Wheels to 2
First, remove the right rear wheel using one wrench to hold one end of the double rear axle bolt in place and another to loosen the other end. Once loose, pull the axle bolt out and set the wheels, double rear axle bolt and double rear wheel bushings aside for storage.Next, remove the wheel spacers, then the deck cover. Once the deck cover has been removed, place the wheel spacers back in their original slots.Last, slide one wheel into the deck and slide the single wheel axle bolt through to lock the wheel in place. Using two 5mm Allen wrenches, tighten the single wheel axle bolt by again holding one end in place while tightening the other.
2 Wheels to 3
Once again, the first step is to remove the wheel using one Allen wrench to hold one end of the single rear axle bolt in place and another to loosen the other end. Once loose, pull the axle bolt and set the wheels, single rear axle bolt and single rear wheel bushings aside for storage.Next, remove the wheel spacers and slide the deck cover into place. Once the deck cover has been installed, place the wheel spacers back in their original slots.Last, slide the double wheel axle bolt through one wheel, then through the wheel spacers and deck. Once it has been threaded through, slide the other wheel on from the opposite side. Using two wrenches, tighten the double wheel axle bolt by again holding one end in place while tightening the other.Once complete, roll the scooter to ensure there is no play in the wheels. If you notice any play or wobbling, tighten the axle bolts until the wheels roll true.Recommended for ages 3 and older and will support a rider up to 45 pounds. The buyer and rider of the Razor scooter are responsible for knowing and obeying all local, state, and federal regulations regarding the riding and use of scooters.
Features/Specifications- 100% aircraft-grade aluminum
- Folding handlebars with foam grips
- Starts as a 3 wheel then turns into a 2 wheeler
- Easy to convert
- Steel and aluminum construction
- Adult assembly required
-
Maxi Micro Kick Scooter – Blue with T-bar
The Maxi Micro® kickboard is designed for elementary school-age kids. The steering features a curving and carving action that is a little like being on a skateboard but with greater control and maneuverability. Kids love the Maxi’s exceptionally smooth glide and strong 3-wheel construction. Choose between two steering options – the Pilot stick for better curving and carving, or a traditional TBar for easier balancing. The handlebar styles are interchangeable, and available as an Accessory – choose one to start and switch to the other at a later time. The Maxi’s steering stick extends from 24in to 36in. The quality choice in kickboard scooters for school-age kids.
-
Razor Pro XX Scooter
Take it to the next level with the Razor Pro series scooters. Used by Team Razor riders to pull off huge tricks, they feature lightweight, super-tough aluminum construction with a rigid down tube and fixed handlebar design. Go big. Go Pro. The Pro XX model scooter is the gateway to advanced riding. Super tough construction for even the longest pavement and park sessions. Discriminating riders will appreciate the Team Razor-approved components: lightweight, aircraft-grade aluminum, smooth rolling 14 spoke wheels, and a rigid down-tube and bar setup. Its competition ready right out of the box. Crafted for those who demand the highest performance and the most sophisticated design. The Pro XX Scooter includes exclusive features that will enhance your performance and stand up to your toughest tricks. Designed and tested by Team Razor pro riders, for maximum durability and performance in mind. The Razor Pro XX is an updated version of the Razor Ultra Pro series, and is based on seven years of rider feedback. The scooter offers a 100% aircraft-grade aluminum body, a double TIG-welded deck for superior strength, and threaded 110mm compatible fork. As a result, this is the ideal scooter for tricks, as it’s ready for all kinds of use and abuse. The scooter also features freestyle rubberized grips to protect your palms along with Razor’s patented rear brake system. Equipped with 14 spoke 110mm high grade urethane wheels and RZR Pro 20 bearings for a smooth ride. Other features include a reinforced Double stacked head tube clamp for extra head tube strength, full-deck grip tape, and a non-folding design (for extra durability). The Pro XX Scooter comes with the standard pro scooter handlebar dimensions of 18” wide and 21.65” tall and deck dimensions of 20” long and 3.81” wide. Recommended for ages 8 and older and will support riders up to 220 pounds. Some assembly required.
-
Razor Battery Charger for the e200, e300, PR200, Pocket Mod, Sports Mod, and Dirt Quad
24V 24V 24V Razor Battery Charger for the e200, e300, PR200, Pocket Mod, Sports Mod, and Dirt Quad
